• alexa thomson


    Error Code 37 is one of the common error code issues that occur with the Device Manager. The Error Code 37 most likely to happen when something goes wrong with the drivers installed for a hardware device. The error message for this issue appears under the Device Status box in the properties of the device. It states that “Windows cannot initialize the device driver for this hardware.”

    Note: Error Code 37 is exclusive to Device Manager. In case you see it anywhere else in your system, then it could be the error code of any other program of the system. Do not try to troubleshoot it as Device Manager issue.

    Troubleshooting solutions to fix Device Manager Error Code 37

    Solution 1: Shutdown and then restart your PC

    Most of the time, these problems arise due to temporary system or hardware issues, which could be easily resolved by refreshing the device. In order to refresh the device, you’ll need to shut down and then restart your PC. Before going ahead to do so, make sure to save your open document and then close all the running programs. Now, shut down your PC as you usually do, then restart it again after waiting for one or two minutes.

    Even after restarting the PC, Error Code 37 appear in the Device Manager, try using the next solutions.

    Solution 2: Revert the changes

    Maybe the Error Code 37 appearing due to the changes made in Device Manager or an installed device. If you have changed any settings or installed a device just before the problem happened, then there are high chances that it would be the reason for the error. Undo the changes you’ve made or uninstall the newly installed device. If you’ve updated the driver, then try rolling back the updated driver to the earlier version. If any of these changes cause the problem, then you’ll not see the Error Code 37 again.

    Solution 3: Use a different USB port

    Sometimes the Device Manager Error Code 37 also appears due to a slower USB port. If you see the Code 37 error message after connecting a USB device to your computer, then might be the USB port you’re using is slower or not compatible with the connected device. Some computer has different types of a USB port; you can also try removing and connecting the device to a different USB port of your system.

    Solution 4: Try reinstalling the driver

    Deleting and installing the fresh drivers for the device can also fix the Device Manager Error Code 37 issue. This solution mainly works when the problem is appearing with device other than DVD, Blu-ray, and CD drives. To uninstall and install the fresh drivers for a device,

    1. Go to the ‘Device Manager.’
    2. Now, look for the device and right-click on it.
    3. Select ‘Uninstall.’ Doing so, delete the driver of the selected device from your computer. Now, you’ll need to install the fresh driver. To do so, continue going through the steps.
    4. Click on the ‘Action’ option.
    5. Then select ‘Scan for hardware changes.’ As you’ll choose this option, Windows will start looking for the new driver and install it on your device automatically.

    Solution 5: Update your device drivers

    If reinstalling the driver won’t troubleshoot the Device Manager Error Code 37 issue in your system, then you should go for updating the driver. Before proceeding to update the driver, check whether you have a 32-bit system processor or 64-bit. While updating the driver, make sure you’re installing the drivers for the system processor you have. Updating the device drivers will fix the Error Code 37 issue as well as give improved performance.

    Hope these solutions will help you to fix the Device Manager Error Code 37 in your Windows computer.

    Source By : https://accounting400117374.wordpress.com/2019/10/14/how-to-troubleshoot-device-manager-error-code-37-in-windows/

    ...Read more
  • alexa thomson


    For the easy transaction, PayPal also provides its mobile app to the users. Many of you are already using it on your devices. However, you can use PayPal through a mobile app and website to send and receive payments. Many times due to some errors, a PayPal payment fails to process. If you also have pending or unclaimed transactions, you may want to cancel them. These payments get the pending or unclaimed status and listed into the ‘Pending’ section of the account. In this article, you’ll learn about canceling pending, unclaimed, recurring, and subscription payments in your PayPal account. 

    How to cancel pending and unclaimed PayPal payments

    In order to view and cancel your PayPal payments with pending or unclaimed status, you need to go the ‘Activity’ section in your account. Here is how.

    1. Launch an internet browser on your device.
    2. Type www.paypal.com into the browser’s address field.
    3. And, press ‘Enter.’ Doing so, open the home page of the PayPal website.
    4. Click on the ‘Login’ option at the top-right corner of the home page.
    5. Enter your PayPal account’s login info into the provided fields and open your account.
    6. After that, click on the ‘Activity’ tab at the top of the page. This will show all your account activity on your screen, including payments transfer using cards, payments received, and so on.
    7. Go to the ‘Pending’ section and look for the pending payment you want to cancel.
    8. Select the pending payment and check its status. Make sure the payment you’re going to cancel is unclaimed. You’ll also see a message saying ‘USER hasn’t accepted yet’ at the lower side of the transaction section.
    9. Click on the ‘Cancel’ option.
    10. Then, select ‘Cancel Payment.’
    11. At last, click ‘Yes’ to confirm cancellation.

    The selected pending and unclaimed payment will be canceled.

    How to cancel recurring and subscription PayPal payments

    In order to cancel recurring and subscription PayPal payments, you have to manage pre-approved payments in your account. Here is how to do this.

    1. Launch an internet browser on your device.
    2. Type in www.paypal.com into the browser’s address field.
    3. And, press ‘Enter.’ Doing so, open the home page of the PayPal website.
    4. Click on the ‘Login’ option at the top-right corner of the home page.
    5. Enter your PayPal account’s login info into the provided fields and open your account.
    6. After that, click on the ‘Settings’ icon at the top right of the page. You will see this near the LOG OUT option.
    7. Now, click on the ‘Payments’ tab near the top of the page.
    8. Under the Payments screen, click on ‘Manage pre-approved payments.’
    9. Find the recurring payments you want to cancel in your PayPal account. Select ‘Next Page’ from the bottom of the page, if needed.
    10. Select a payment to cancel.
    11. Now, go to the ‘Billing Details’ section of the payment.
    12. Look for the ‘Cancel’ option under Status and click on it.
    13. Click ‘Yes’ in the Cancel Confirmation box.

    The selected recurring or subscription payment will be canceled.

    Source By : https://accounting400117374.wordpress.com/2019/10/14/how-to-cancel-pending-unclaimed-or-subscription-payments-on-paypal/

    ...Read more
  • alexa thomson


    Device Manager holds a lot of settings for managing the hardware device of a system. You can view the device status, uninstall or reinstall drivers of a device as well as troubleshoot many kinds of issues with the devices from the Device Manager. Therefore, knowing how to access the Device Manager in your version of Windows is necessary. Accessing it isn’t as simple as opening your regular program, because you’ll not find in the regular program list. But, just like other settings, there are many ways in Windows to access the Device Manager. If you’ve moved to a newer version of Windows and don’t know where you’ll find Device Manager into it, then this article will surely help you.

    Although, accessing Device Manager in any Windows version is simple enough and hardly takes a minute. You can use Windows Search utility to find and access anything on your device, including Device Manager. But, there are several other ways to access it, which are discussed in this article.

    Here is how to access the device manager in any version of Windows

    Accessing Device Manager in Windows 10

    There are many ways to reach the Device Manager window in Windows 10.

    • Press the ‘Windows + X’ button together on your keyboard to open Power User Menu. Find the ‘Device Manager’ in the menu and click it to open.
    • Press the ‘Windows’ button or click ‘Windows’ icon on the screen, then place the mouse cursor over the ‘Control panel’ in the start menu. Now, look for the ‘Device Manager’ in the Control Panel submenu and click on it.
    • Press the ‘Windows’ button or click ‘Windows’ icon on the screen to open the start menu, then click on ‘Control Panel.’ Go to ‘Hardware and Sound’ and then ‘Device and Printers’ section. Look for ‘Device Manager’ and click on it. Device Manager window will come up on your screen.

    Accessing Device Manager in Windows 8

    Several ways for accessing Device Manager in Windows 8 are similar to Windows 10.

    • Just like Windows 10, you can open ‘Device Manager’ in Windows 8 as well, direct from the Power User Menu. To know how to access the Power User Menu, check the first point of Windows 10.
    • The procedure for accessing Device Manager from Control Panel is exactly the same as in Windows 10. Refer to the last point of the above Windows 10 guide.

    Accessing Device Manager in Windows 7

    Windows 10 and Windows 8 are the newer versions of Microsoft Windows. Therefore many features and settings are similar in them. But, Windows 7 is a lot different from the newer as well as, the older version of Windows. Here is how to access Device Manager in Windows 7.

    1. Go to ‘Control Panel.’ You can open it from the start menu.
    2. And open ‘System and Security.’
    3. Go to the ‘System’ section.
    4. Look for the ‘Device Manager’ and click on it to open.

    Accessing Device Manager in Windows XP

    In Windows XP, accessing the Device Manager is a bit complex. But, once you know the process, you’ll become familiar with it.

    1. Press the ‘Windows’ button or click the ‘Windows’ icon on the screen to open the start menu.
    2. Now, look for the ‘Control Panel’ into the menu and click on it.
    3. Go to ‘Performance and Maintenance.’
    4. Select ‘System.’
    5. Then go to the ‘Hardware.’
    6. And click on the ‘Device Manager.’

    Device Manager Window will be opened on your screen.

    You can now check the device status, enable or disable devices, uninstall or update the drivers as well as manage other device settings from the Device Manager in your Windows version.

    Tip: If you like to use command prompts, then enter “devmgmt.mcs” and hit ‘Enter.” This is the quickest way to access Device Manager in any version of Windows.

    Source By : https://accountsupport697459633.wordpress.com/2019/10/14/how-to-access-device-manager-in-any-version-of-windows/

    ...Read more
  • alexa thomson

    Trailer Released for The Expanse Season 4

    The story is set in the far future in a human colonized solar system. There is a spar of war flaming amidst humans because of the limited amount of resources. The different factions of social positioning and privilege in existence are walking on eggshells as the balance throughout the planets may unravel at any time.

    All the prior seasons have followed the story of their parent novel, and going by this pattern; the fourth season will adapt the fourth novel, Cibola Burn. We will follow infinite new worlds accessible to exploration as a result of wormholes happening at the end of the third season. Tension will grow on a new planet between the greedy corporations and the independent settlers. The settlers are desperate in their attempts to leave the past behind, while the corps simply want to exploit the planet’s resources.

    The trailer was dropped on the official YouTube channel of Amazon Prime Video, and it hints on what can be expected from the forthcoming season. Like the prior trailers, this one also does not reveal any major plot points, but the expected amount of action and drama is confirmed via the trailer.

    The series is a stand-alone production by Alcon Entertainment, and it previously aired on Syfy. Syfy decided not to renew the series because of the restrictive license agreement, which allowed network only the first-run linear rights. This means that the show had to be watched live, or it would not be successful. The task seems immensely difficult, given the fact that nowadays, people prefer digital media over traditional means of entertainment. Amazon picked the show a couple of weeks later, and it finished filming earlier in 2019.

    The show is an independent production that is filmed and sold as a package, which means the quality would not be dropping no matter what network releases it. This was somewhat confirmed seeing the trailer for the upcoming season. JFK’s 1962 speech was used in the trailer, which is as fitting as it is ironic. Fitting in the sense as now humanity has access to the infinite world throughout the galaxy; however, the human tendency to turn on itself and ruin everything could prove to be fatal. The show is much-awaited throughout the globe, and everyone is waiting to see how good of an adaptation the fourth season would be.

    Source By : https://accountsupport697459633.wordpress.com/2019/10/11/trailer-released-for-the-expanse-season-4/

    ...Read more
  • alexa thomson

    Spider-Man: New Deal between Sony and Marvel

    Luckily for us, a deal has been settled between Marvel and Sony stating Tom Holland’s stay as Spider-Man in the MCU. However, the new agreement has key differences from the previous Marvel-Sony deal. The prior agreement that was signed in 2015 is gone for good, which is known to everyone.  The new deal details were discussed in an official statement recently.

    However, the press release this time around is a lot more secretive than the previous ones. It may suggest that the previous Marvel-Sony deal was wrapped up because of a major hack. This means that the contract drafts were possibly located in a public domain previously. This time around Marvel has been relatively secretive about the agreement details. It is almost certain that the time when Marvel would announce their next five movie releases is gone. This naturally means that the new Marvel-Sony Spider-man deal is a lot more secretive.

    The Original Marvel-Sony Spider-Man Contract

    After the second installment of The Amazing Spider-Man franchise proved to be critically deficient and not profitable, a deal was initiated. It was way back in 2014 when Marvel Studios apprehended Sony Pictures regarding an unforeseen Spider-Man deal. It was decided that both the studios would share the wall-crawler. Sony would still retain full rights; however, Marvel could also release a new series starring Spider-Man. Kevin Fiege was decided to be the producer for the Marvel movies. Sony would pay and distribute the film; however, they were at a profit from the deal. Marvel only received 5 percent of the profits; however, they would also be able to use that version of Spidey independently under their studios.

    The deal was rejected initially but after a hack in 2014 exposed that there was a lot of confusion regarding Spidey’s future. This, in turn, persuaded the shareholders to reconsider the deal in early 2015. The original deal covered five MCU movies for Spidey to feature in. They were:

    1. Debut in Captain America: Civil War
    2. Spider-Man: Homecoming
    3. Avengers: Infinity War
    4. Avengers: Endgame, and
    5. Spider-Man: Far From Home.

    Two movies featuring Tom Holland were also agreed upon, but unfortunately, this seems to be done for.

    The New Deal

    The new Marvel-Sony deal covers two movies: Spider-Man: Homecoming 3, in July 2021 which will bring an end to Tom Holland’s Spider-Man trilogy, and one still to be decided mystery Marvel film. Kevin Fiege, president of Marvel Studios, will be producing the movies.

    Twenty-five percent of the profits from Spider-Man: Homecoming 3 will be provided to Sony while they are also expected to pay off roughly a quarter of the product cost. Surprisingly Tom Rothman, the chief of Sony Pictures who is believed to be a tough negotiator offered up this deal. Disney and Marvel refused the deal but seeing as the deal is now finalized Sony coming out of the renegotiation is more likely.

    Sony may retain a level of access to Spider-Man even within the new terms. It will be interesting to see how the deal pans out.

    Source By : https://accountsupport697459633.wordpress.com/2019/10/11/spider-man-new-deal-between-sony-and-marvel/

    ...Read more
  • Sonia B.

    Find the Best New online casino bonus Sites UK

    All casino Site is an online casino comparison site, specialising in UK brands. Inside you will find no deposit required offers, new casino sites UK, reviews, news and more.

    ...Read more
  • alexa thomson




    Before you go to the Settings and hit the update button there some things that you should do before updating to the iOS 13. In case anything goes wrong during the installation process, it can wipe out your data. So, first of all, let’s take a backup of your device. The backup will help you to restore all files and settings.

    iOS 13 Compatible Devices 

    • iPhone XS
    • iPhone X
    • iPhone XS Max
    • iPhone 8
    • iPhone 7
    • iPhone XR
    • iPhone 8 Plus
    • iPhone 7 Plus
    • iPhone SE
    • iPhone 6S Plus
    • iPhone 6S

    Get Some Free Space By Removing Less Important Items

    The new iOS 13 will require a significant amount of free space. So before even taking the backup, look into the mirror and ask a few questions from yourself. First of all, take a look at your installed apps, photos, and other files. Now ask yourself: Do I really need this app or file? Can I survive without it? If I delete it, will it make any change to my daily life?

    By asking those questions, you can remove unnecessary things from your device. This will create a significant amount of free space on your device. Delete the files that are consuming lots of space.

    Taking a Thorough Backup of Your iPhone 

    There are primarily two types of ways to take a backup of your iPhone. The first way to take backup is by using iTunes on your Mac or Windows-PC. The second way to take a backup of an iOS device is by using the iCloud service, and this method is quick and easy.

    Backing Up Using the iCloud 

    iCloud service is the best way to backup an iPhone or iPod Touch. Every iCloud account comes with 5GB of cloud storage. This can be used to take a backup of your iPhone. 

    1. Go to Settings and then go to your name.
    2. Navigate and then press the iCloud option.
    3. Scroll downwards and then select the iCloud backup. After that, go to the Back Up Now option.
    4. If you are using iOS 10.2 or older, then tap the “Backup” option. 
    5. To check the status of the backup process, go to Settings and then to iCloud. Now go to iCloud Storage and then to Manage Storage. Choose your device from the given options.

    Backup Using iTunes Application on Your Mac or Windows PC

    If you got an old Mac and Windows PC, then iTunes will allow you to take a backup of your iPhone or iPod Touch. Follow the steps given below to back up your device with iTunes:

    1. First of all, ensure that the iTunes application is up-to-date. 
    2. Connect your iPhone to your computer using a lightning cable. 
    3. Now with the help of On-screen instructions, enter your device passcode if asked to do so. If asked to “Trust this Computer” then allow it.      
    4. Now choose your iPhone on the iTunes application.
    5. Press the Back Up Now button to start the process.  

    How to Download and Install iOS 13 on iOS?

    1. Head to the Settings option on your iOS device.
    2. Go to General and then to Software Update.
    3. The system will check for updates by itself. You will get an alert about iOS 13 is available. Hit the “Download and Install” option.
    4. Grab a cup of coffee and wait till the process completes. You won’t be able to use the device until it completes.

    Using iTunes to Install iOS 13

    You can also upgrade to the iOS 13 using the iTunes app on your Mac and Windows PC. See the instructions given below:

    1. Ensure that you are using the newest iTunes version.
    2. Connect your iOS device to your Mac or computer using a Connector cable. 
    3. Launch the iTunes application and then choose your iOS device from the list.
    4. Go to the “Summary” option and then select Check for Updates.
    5. Hit the “Download and Update” option.


    Source By : Canon printer Support

    ...Read more
  • alexa thomson



    How to Register for the Apple Arcade Gaming Service?

    Ensure to have your Apple ID before starting because you will need it while signing up for Apple Arcade. If you forgot the Apple ID, then you can find Apple ID in the Apple App Store settings. Also, look in the iTunes and iCloud settings for the Apple ID. Once you have the Apple ID, you are ready to move ahead in the process. Follow the below steps to complete the signup process:

    1. Go to the Apple App Store on your iOS device.
    2. Click on the “Arcade” (Joystick) icon located on the lower-right on your screen. 
    3. Apple allows you to play free games using the Apple Arcade for a month. So hit the “Try It Free” option. 
    4. Now if asked to sign in to the Apple account, do it with your Apple ID.
    5. Hit the Confirm option to enjoy the one month free trial period.

    If you use the Apple Arcade free trial for a month, then after a month, you will be charged automatically for using the service.

    However, you can cancel the service before the next month starts, to prevent the automatic gaming charges.

    You can use a remainder for canceling the subscription from the Apple Arcade gaming service. To cancel the service follow the instructions given below:

    1. Under the Apple App Store, go to the Account picture on the upper-right corner. 
    2. Head to the Subscriptions and then to Apple Arcade. 
    3. Hit the Cancel button to end your Apple arcade plan.

    Now you will not be charged for the service since the first month was free to use. 

    How to Start Playing Apple Arcade Games?

    Once you have the subscription for Apple Arcade whether it is a free trial or the paid period you can play the games easily in it. There are many games available in various categories but don’t expect a huge collection because the service has just started. Apple says that they will launch new games every week and every month.

    To play games, see the steps given below:

    1. To search game, you can scroll downwards to look for games that you are interested in. Or you can also scroll down to the end and then hit the See All Games to explore all titles.
    2. If you like a game and want to try it, then click on the Get option located next to the name of that game. 
    3. The downloading process will start just after that, once it ends hit the Play button.
    4. If asked to sign in for Game Center, do so. If you want to avoid it, then you can also choose the Not Now option to play the game instantly.
    5. The game will start shortly after it.

    Don’t forget to unsubscribe from the Apple Arcade gaming service, especially when you don’t want to empty out your wallet for playing games. 


    Source By : Lexmark printer support

    ...Read more
  • alexa thomson


    If this information is not updated from time to time, then this might create many problems related to the use of Apple ID. If you’ve moved to a new place, changed credit cards, or have done other changes in the info that your Apple ID also uses, then you will also need to update them in your Apple ID so that you can keep using it without any issue. You can access and update details in your Apple ID from any device you can use.

    Here is how to update your Apple ID info from iPhone or computer

    Note: In order to update the info in your Apple ID account, you must have its access. You need to login into it with any device. If you didn’t remember the password of your Apple ID, then you have to reset it to regain access.

    Updating Apple ID billing address and credit card info from iOS device

    Changing the billing address and credit card info in Apple ID changes them for all App Store and iTunes purchases. The simple procedure for updating Apple ID info from iPhone is described below:

    1.   Unlock your iPhone/iPad and go to the ‘Settings.’

    2.   Under settings, touch on your ‘Apple ID’ name at the top.

    3.   Then open ‘Payment & Shipping.’

    4.   A prompt may now appear asking you for the Apple ID. This is for your account safety, provide your Apple ID password if you see it.

    5.   Payment & Shipping screen will now open with your shipping address and other details.

    6.   Select ‘Add Payment Method’ if you want to add a card.

    7.   Select a payment method you wish to add to your Apple ID. If cards are previously added to Apple Pay will appear under Found in Wallet section, if you want to add any of them just select it. You can also choose some other option from the Payment Method section to add a new one.

    8.   Now, provide the details of the new card, including card number, cardholder name, CVV, expiration date, and a contact number. You can select ‘PayPal’ and follow the on-screen instructions to link Apple ID to your PayPal account.

    9.   Touch ‘Done’ to save and open Payment & Shipping screen.

    10. You can now enter or update your Apple ID shipping address from the SHIPPING ADDRESS field.

    11. Touch ‘Done’ and close settings to finish.

    Updating Apple ID billing address and credit card info from computer

    If instead of your iPhone or iPad you want to update your Apple ID info on a big screen, then you can use your Mac or PC to do so. You can easily update these details from iTunes Store as well by going into the Apple ID Summary section under Account and selecting Payment Information.

    1.   Start a browser on your Mac or PC to access your Apple ID account.

    2.   Then, go to ‘appleid.apple.com.’

    3.   Now, sign in to your Apple account by entering the Apple ID and password.

    4.    Go to Payment & Shipping section and click on the ‘Edit’ button at the right side.

    5.   Open ‘COUNTRY/REGION’ dropdown to change your previously set location.

    6.   Click on PAYMENT METHOD button to add a new credit or debit card.

    7.   If you want to change your billing address, then you can do so from the BILLING ADDRESS section.

    8.   When you are done changing your Apple ID info, click on ‘Save’ at the top.

    Your Apple ID info will update successfully, and you can now sign out from browser and make purchases with your newly added card.

    Alexa Thomson is a printer expert who has worked with leading printer hardware and software companies. Owing to her expertise in IT, and technology, her blogs have been published in leading magazines and platforms. Her favorite printer writings come for lexmark printer support.

    ...Read more
  • alexa thomson


    Where Tumblr is especially for writing and sharing microblogs, possibly onto it, you’ll want to change the font style. If you want to use a different font style for your Tumblr blogs, then you can easily do it so. In order to change and use a different font style, you need to apply a theme first, that you can do from the Tumblr settings under ‘Edit Theme.’ Applying a new Tumblr theme enables you to change the fonts on Tumblr.

    Here is how to change theme and fonts on Tumblr

     Accessing Tumblr settings to change theme and fonts

    Although you can’t directly change the fonts on Tumblr from settings, to change fonts, you have to use a theme that supports fonts and allows to do so. There are many themes you’ll find on Tumblr; some of them are free where some need to be purchased.

    1.   Visit “www.tumblr.com” with a web browser you want to use. You can use any good browser on your Mac or PC.

    2.   Select the ‘Login’ option and open your Tumblr account. For logging in, you must have known your Tumblr account credentials.

    3.   Click the ‘Person’ icon.

    4.   From the opened dropdown, go to ‘Settings.’

    5.   Now, go to the ‘Blogs’ section in the right side column at the bottom.

    6.   You’ll see your blogs here, click on the blog’s name you want to change the fonts of. It will open the settings menu for the selected blog.

    7.   Click on ‘Edit Theme’ button next to Website Theme heading.

    8.   Under the Edit theme column, click on the ‘Browse themes’ option. You’ll get this button below the name of the currently applied theme.

    9.   Tumblr themes will now show up on the screen, find a theme that supports font changing, and you would like to use. In order to browse free themes only, open the top dropdown button and choose ‘Free Themes.’

    10.  Click a theme to select.

    11. After that, click on the blue ‘Use’ button at the top right corner of the left-hand column. You can now see how the theme looks like on your screen.

    12.  Now, see whether your chosen theme allows changing fonts. If it allows, then check which fonts it can change on Tumblr. Each Tumblr theme has different options for changing fonts. Some themes only change the Title fonts, whereas with some you can almost change the entire fonts, including Title font, Body font, Header font, Footer font, Menu font, and more. Themes that allows changing the fonts, display options for changing fonts in the menu.

    13. Under the theme menu, look for what you want to change the fonts, Text type, Title font, Body font, and so on.

    14.  Click and open the dropdown button of the thing you want to change the fonts of.

    15.  The dropdown menu will show a list of the different fonts and font style. You can use any font appearing in the dropdown menu.

    16. Select the font you want to preview or use. It will preview at the center of the screen.

    17.  Check if there is also an option for changing the font color. Along with font style, many themes allow changing the font color as well. If you see the color-changing button, then click on it to view and choose a color for your font.

    18. You have to do the same thing to change the font and color of other things.

    19. Click and open the Font size dropdown to choose and change the font size, if you see it under the font menu of your theme.

    20. When you are satisfied with the fonts, click ‘Save.’

    21.  Then click ‘Exit’ to close the font menu.

    New font with your chosen color and size will be applied.

    Alexa Thomson is an employee at a top email service provider company in the day and a technical writer at night. She is passionate about writing troubleshooting tips, beginner’s guides, news, and other articles on varied topics. She has written majorly on hp printer support, lexmark printer support and brother printer etc.

    ...Read more